Feed Performance Computing Form

Values of the displayed performance graph and performance table
may not be satisfied due to the load on the feeder due to material stress etc.

Input basic conditions ...

Model :

Material Weight [kg] : , , ,

Please enter in the range of 0~2.5.

Select the horizontal axis of the performance graph.

Press Speed

Feed Angle [deg] : , , ,

Please enter in the range of 1~300.

Press Speed [spm] : ~

*Specify the range to be displayed.

Display priority parameter :Feed AngleMaterial Weight

Feedable Time

Feedable Time [ms] : ~

*Specify the range to be displayed.

Press Speed [spm] : , ,

Please enter in the range of 1~1000.

When "Feeding time" is selected, the display priority parameter is "Fixed material weight".

Enter optional conditions ...

Comparative Model :

Target Feed Length [mm] :

Model H07 Specifications

Max. Press Rotational Speed [spm]	1000
Max. Feed Speed [mm/s]	1798

Required Release Operation Angle

Model H07 at 1000spm

The feed start angle and the feed end target angle (Overrun Check) setting are limited to 210 to 0 to 150 °. Therefore, the maximum feed angle that can be set is 300°.
If you do not use press angle encoder, advance timing control of release timing according to press speed will be ineffective. Actual operation is delayed in Release Lag and Closing Lag time on the graph against the start / end timing of release by the cam signal.

Model H07 Performance Graph

Chart Manipulation Method

Double click : Zoom out.
Drag vertically or horizontally : Zoom specified area.
Hold down Shift key and drag : Move zoomed area.

X Axis : Logarithmic Linear
Y Axis : Logarithmic Linear

FeedAngle:150°

FeedAngle:180°

FeedAngle:210°

Model H07 Performance Table

Row Step Value

FeedAngle:150°

Press Speed [spm]	Max. Feed Length[mm]
	H07
	0kg	1.5kg	2.5kg
1000	3.0	3.0	0.8 [29%]
980	3.2	3.2	0.9 [29%]
960	3.5	3.5	1.0 [29%]
940	3.8	3.8	1.1 [29%]
920	4.1	4.1	1.2 [29%]
900	4.4	4.4	1.2 [29%]
880	4.8	4.8	1.4 [29%]
860	5.2	5.2	1.5 [29%]
840	5.6	5.6	1.6 [29%]
820	6.1	6.1	1.7 [29%]
800	6.6	6.6	1.9 [29%]
780	7.2	7.2	2.0 [29%]
760	7.8	7.8	2.2 [29%]
740	8.5	8.5	2.4 [29%]
720	9.2	9.2	2.6 [29%]
700	10.1	10.1	2.9 [29%]
680	11.0	11.0	3.1 [29%]
660	12.0	12.0	3.4 [29%]
640	13.1	13.1	3.8 [29%]
620	14.4	14.4	4.1 [29%]
600	15.8	15.8	4.5 [29%]
580	17.4	17.4	5.0 [29%]
560	19.1	19.1	5.5 [29%]
540	21.1	21.1	6.1 [29%]
520	23.4	23.4	6.7 [29%]
500	25.9	25.9	7.5 [29%]
480	28.8	28.8	8.3 [29%]
460	32.2	32.2	9.3 [29%]
440	36.1	36.1	10.4 [29%]
420	40.6	40.6	11.7 [29%]
400	45.8	45.8	13.3 [29%]
380	51.7	51.7	15.0 [29%]
360	58.3	58.3	17.2 [29%]
340	65.7	65.7	19.7 [29%]
320	73.9	73.9	22.8 [29%]
300	83.3	83.3	26.5 [29%]
280	94.0	94.0	31.1 [29%]
260	106.3	106.3	36.9 [29%]
240	120.8	120.8	44.3 [29%]
220	137.8	137.8	53.8 [29%]
200	158.2	158.2	66.6 [29%]
180	183.2	183.2	83.9 [29%]
160	214.4	214.4	108.5 [29%]
140	254.6	254.6	144.7 [29%]
120	308.1	308.1	198.0 [29%]
100	383.1	383.1	273.0 [29%]
80	495.5	495.5	385.4 [29%]
60	682.8	682.8	572.7 [29%]
40	999.9 [44%]	999.9 [44%]	947.4 [29%]
20	999.9 [4%]	999.9 [4%]	999.9 [4%]

FeedAngle:180°

Press Speed [spm]	Max. Feed Length[mm]
	H07
	0kg	1.5kg	2.5kg
1000	5.8*	5.8*	1.6* [29%]
980	6.2*	6.2*	1.8* [29%]
960	6.6*	6.6*	1.9* [29%]
940	7.1*	7.1*	2.0* [29%]
920	7.6*	7.6*	2.2* [29%]
900	8.1*	8.1*	2.3* [29%]
880	8.7	8.7	2.5 [29%]
860	9.4	9.4	2.7 [29%]
840	10.1	10.1	2.9 [29%]
820	10.8	10.8	3.1 [29%]
800	11.6	11.6	3.3 [29%]
780	12.5	12.5	3.6 [29%]
760	13.5	13.5	3.9 [29%]
740	14.6	14.6	4.2 [29%]
720	15.8	15.8	4.5 [29%]
700	17.1	17.1	4.9 [29%]
680	18.5	18.5	5.3 [29%]
660	20.1	20.1	5.8 [29%]
640	21.8	21.8	6.3 [29%]
620	23.8	23.8	6.9 [29%]
600	25.9	25.9	7.5 [29%]
580	28.3	28.3	8.2 [29%]
560	31.0	31.0	9.0 [29%]
540	34.1	34.1	9.8 [29%]
520	37.5	37.5	10.8 [29%]
500	41.4	41.4	12.0 [29%]
480	45.8	45.8	13.3 [29%]
460	50.7	50.7	14.7 [29%]
440	56.0	56.0	16.4 [29%]
420	61.9	61.9	18.4 [29%]
400	68.3	68.3	20.7 [29%]
380	75.4	75.4	23.3 [29%]
360	83.3	83.3	26.5 [29%]
340	92.1	92.1	30.3 [29%]
320	102.0	102.0	34.8 [29%]
300	113.3	113.3	40.3 [29%]
280	126.1	126.1	47.2 [29%]
260	140.9	140.9	55.7 [29%]
240	158.2	158.2	66.6 [29%]
220	178.7	178.7	80.6 [29%]
200	203.2	203.2	99.3 [29%]
180	233.2	233.2	124.7 [29%]
160	270.6	270.6	160.6 [29%]
140	318.8	318.8	208.7 [29%]
120	383.1	383.1	273.0 [29%]
100	473.0	473.0	362.9 [29%]
80	607.9	607.9	497.8 [29%]
60	832.7	832.7	722.6 [29%]
40	999.9 [14%]	999.9 [14%]	999.9 [14%]
20	999.9 [3%]	999.9 [3%]	999.9 [3%]

FeedAngle:210°

Press Speed [spm]	Max. Feed Length[mm]
	H07
	0kg	1.5kg	2.5kg
1000	9.5*	9.5*	2.7* [29%]
980	10.1*	10.1*	2.9* [29%]
960	10.7*	10.7*	3.1* [29%]
940	11.4*	11.4*	3.3* [29%]
920	12.1*	12.1*	3.5* [29%]
900	13.0*	13.0*	3.7* [29%]
880	13.8*	13.8*	4.0* [29%]
860	14.8*	14.7* [99%]	4.2* [29%]
840	15.8*	15.6* [99%]	4.5* [29%]
820	16.9*	16.6* [99%]	4.9* [29%]
800	18.1*	17.7* [98%]	5.2* [29%]
780	19.4*	18.9* [98%]	5.6* [29%]
760	20.8*	20.2* [97%]	6.0* [29%]
740	22.4	21.6 [97%]	6.4 [29%]
720	24.1	23.2 [96%]	6.9 [29%]
700	25.9	24.8 [96%]	7.5 [29%]
680	28.0	26.7 [95%]	8.1 [29%]
660	30.2	28.7 [95%]	8.7 [29%]
640	32.7	30.9 [95%]	9.5 [29%]
620	35.5	33.4 [94%]	10.3 [29%]
600	38.6	36.1 [94%]	11.1 [29%]
580	42.0	39.2 [93%]	12.1 [29%]
560	45.8	42.6 [93%]	13.3 [29%]
540	50.0	46.4 [93%]	14.5 [29%]
520	54.5	50.7 [92%]	15.9 [29%]
500	59.3	55.5 [92%]	17.5 [29%]
480	64.6	61.0 [93%]	19.3 [29%]
460	70.3	67.2 [94%]	21.4 [29%]
440	76.5	74.3 [95%]	23.7 [29%]
420	83.3	82.6 [98%]	26.5 [29%]
400	90.8	90.8	29.7 [29%]
380	99.1	99.1	33.4 [29%]
360	108.3	108.3	37.8 [29%]
340	118.6	118.6	43.1 [29%]
320	130.1	130.1	49.4 [29%]
300	143.2	143.2	57.1 [29%]
280	158.2	158.2	66.6 [29%]
260	175.5	175.5	78.4 [29%]
240	195.7	195.7	93.4 [29%]
220	219.5	219.5	112.8 [29%]
200	248.2	248.2	138.5 [29%]
180	283.1	283.1	173.0 [29%]
160	326.8	326.8	216.8 [29%]
140	383.1	383.1	273.0 [29%]
120	458.0	458.0	347.9 [29%]
100	562.9	562.9	452.8 [29%]
80	720.3	720.3	610.2 [29%]
60	982.6	982.6	872.5 [29%]
40	999.9 [8%]	999.9 [8%]	999.9 [8%]
20	999.9 [2%]	999.9 [2%]	999.9 [2%]

・ * Mark: Depending on the start angle and acceleration of the press machine, the release operation may not be able to follow up.
・Percent(%)：The value of Accel or Speed at the maximum feed length is displayed.